Search results for "fusion power"
showing 10 items of 78 documents
Interaction of a Liquid Gallium Jet with ISTTOK Edge Plasmas
2008
The use of liquid metals as plasma facing components in tokamaks has recently experienced a renewed interest stimulated by their advantages in the development of a fusion reactor. Liquid metals have been proposed to solve problems related to the erosion and neutronic activation of solid walls submitted to high power loads allowing an efficient heat exhaust from fusion devices. Presently the most promising candidate materials are lithium and gallium. However, lithium has a short liquid state range when compared, for example, with gallium that has essentially better thermal properties and lower vapor pressure. To explore further these properties, ISTTOK tokamak is being used to test the inter…
Safety analysis of the DONES primary heat removal system
2020
Abstract The development of a neutron source able to reproduce the irradiation conditions typical of a nuclear fusion reactor, in order to test candidate structural materials, is the main goal of the Work Package Early Neutron Source (WPENS) of the EUROfusion action. This source, named Demo Oriented NEutron Source (DONES), is a facility where neutrons are produced by means of D-Li interactions. More in detail, a beam of 125 mA deuterium ions at the energy of 40 MeV strikes a lithium jet flowing in a purposely shaped channel in order to obtain an intense and stable neutron flux for the irradiation of material samples. In the framework of these activities, safety analyses are a key aspect in …
Integration of DEMO hazard piping into the tokamak building
2021
Abstract Because of the complexity of the design of a Fusion Power Plant like the EU DEMOnstration power plant the study of the plant layout must proceed in parallel with the design of the major systems. This is necessary to ensure that the design of the plant incorporates from the very beginning sound considerations on: • Safety and licensing, • Personnel security in context with operation and maintenance, • Adequate plant availability, and • Safe performance operation including delivery of few hundred MW net electric power to the electrical grid. Though it is a process of trial and change that follows the design evolution, this approach allows a better and continuous control of the numero…
Thermo-mechanical analyses and ways of optimization of the helium cooled DEMO First Wall under RCC-MRx rules
2017
Abstract The EUROfusion Consortium develops a design of a fusion power demonstrator plant (DEMO) in the framework of the European “Horizon 2020” innovation and research program. One of the key components in the fusion reactor is the Breeding Blanket (BB) surrounding the plasma, ensuring tritium self-sufficiency, heat removal for conversion into electricity, and neutron shielding. Among the 4 candidates for the DEMO BB, 2 of them use helium as coolant (HCPB, HCLL), and another one (DCLL) uses helium to cool down the First Wall (FW) only. Due to uncertainties regarding the plasma Heat Flux (HF) load the DEMO BB integrated FW will have to cope with, a set of sensitive thermal and stress analys…
Thermo-mechanical analysis of irradiation swelling and design optimization of the IFMIF target assembly with bayonet backplate
2017
Abstract The availability of a high flux neutron source for testing candidate materials under irradiation conditions, which will be typically encountered in future fusion power reactors (ITER, DEMO, FPR), is a fundamental step towards the development of fusion energy. To this purpose, the International Fusion Materials Irradiation Facility (IFMIF) represents the reference option to provide the fusion community with a DEMO-relevant neutron source capable of irradiating samples at a damage rate of up to 20 dpa/fpy (in steel) in a volume of 0.5 l. In the framework of the engineering design activities of IFMIF, ENEA is committed in the design of the lithium target assembly (TA) with removable (…
Parametric thermal analysis for the optimization of Double Walled Tubes layout in the Water Cooled Lithium Lead inboard blanket of DEMO fusion reactor
2019
Abstract Within the roadmap that will lead to the nuclear fusion exploitation for electric energy generation, the construction of a DEMOnstration (DEMO) reactor is, probably, the most important milestone to be reached since it will demonstrate the technological feasibility and economic competitiveness of an industrial-scale nuclear fusion reactor. In order to reach this goal, several European universities and research centres have joined their efforts in the EUROfusion action, funded by HORIZON 2020 UE programme. Within the framework of EUROfusion research activities, ENEA and University of Palermo are involved in the design of the Water-Cooled Lithium Lead Breeding Blanket (WCLL BB), that …
Neutronic and photonic analysis of the water-cooled Pb17Li test blanket module for ITER-FEAT
2002
Abstract Within the European Fusion Technology Program, the Water-Cooled Lithium Lead (WCLL) DEMO breeding blanket line was selected in 1995 as one of the two EU lines to be developed in the next decade, in particular with the aim of manufacturing a Test Blanket Module (TBM) to be implemented in ITER. This specific goal has been maintained also in ITER-FEAT program even if the general design parameters of the TBMs have reported some changes. This paper is focused on the investigation of the WCLL-TBM nuclear response in ITER-FEAT through detailed 3D-Monte Carlo neutronic and photonic analyses. A 3D heterogeneous model of the most recent design of the WCLL-TBM has been set-up simulating reali…
Identification of blanket design points using an integrated multi-physics approach
2017
Abstract The breeding blanket (BB) is one of the key components for a fusion reactor. It is expected to sustain and remove considerable heat loads due to the heat flux coming from the plasma and the nuclear power deposited by the fusion neutrons. In the design of the BB, the engineering requirements of nuclear, material and safety kind are involved. In the European DEMO project, several efforts are dedicated to the development of an integrated simulation-design tool able to perform a multi-physics analysis, allowing the characterisation of BB design points which are consistent from the neutronic, thermal-hydraulic and thermo-mechanical point of view. Furthermore, at Karlsruhe Institute of T…
A constitutive model for the thermo-mechanical behaviour of fusion-relevant pebble beds and its application to the simulation of HELICA mock-up exper…
2007
Abstract Within the framework of the R&D activities promoted by EFDA on the Helium-Cooled Pebble Bed Test Blanket Module to be irradiated in ITER, attention has been focused on the modelling of the thermo-mechanical behaviour of both beryllium and lithiated ceramic pebble beds that are envisaged to be used respectively as neutron multiplier and tritium breeder. This behaviour depends, mainly, on the reactor-relevant conditions, the pebble sizes and the breeder cell geometries and a general constitutive model has not yet been validated, especially for fusion-relevant applications. ENEA-Brasimone and the Department of Nuclear Engineering (DIN) of the University of Palermo have performed inten…
On the influence of the supporting frame on the nuclear response of the Helium-Cooled Lithium Lead Test Blanket Module for ITER
2006
Abstract Within the European Fusion Technology Programme, very intense research activities have been promoted on the Helium-Cooled Lithium Lead (HCLL) breeding blanket concept with the specific aim of manufacturing a Test Blanket Module (TBM) to be irradiated in ITER. HCLL-TBM is foreseen to be located in an ITER equatorial port, being housed inside a proper steel-supporting frame. In particular, since that frame has been designed to provide two cavities separated by a dividing plate and HCLL-TBM is foreseen to fill just one of them, its nuclear response could vary accordingly to the filling status of the other one, unless the dividing plate is thick enough to isolate the components housed …